320g Overheating Protection Triac Dimmable LED Driver Constant Voltage 12V Output

1-35W Constant Voltage DC12V Output TRIAC Dimming Driver DM9132H-T12

SUMIRIZE:

This 35W triac dimming driver series products has actually four products: two constant voltage products and two constant current products.

Constant voltage 35W products are DM9130H-T12 which output voltage is DC12V and DM9130H-T24 which output voltage is DC24V. Constant current 35W products are DM9130H-T350 which output current is 350mA and DM9130H-T700 which output current is 700mA.

By the way, we accept customized order because the output voltage or output current is available to modify as you need. They are the same in apperance and have only several differences which can fit more circumstances.

1. AC40V-220V Triac dimmer and dimmer curve smoothing, according to the Triac rectifier output voltage is proportional to the curve.

2. Constant Voltage Output DC12V, Max Current: 3A, Max Power: 35W.

3. With output short circuit protection, power protection, overheating protection functions.

4. The driver cascade when using please choose appropriate power Triac dimmer.

5. Can be controlled by Lutron, Dynalite, Osram, Tridonic dimming system, also can be controlled by Triac dimmer (such as DM8088 Triac dimmer of Shanghai JIBANG).

6. Custom-made is available and 3 years warranty.

Tech-parameter:

Product Size:

Specifications of Triac Dimming Driver Series:

Function Instructions:

1).This product can be controlled by Lutron, Dynalite, Osram, Tridonic dimming system, also can be controlled by Triac dimming switch/knob (such as DM8088 Triac dimming knob from Shanghai JIBANG).

2).Please read the connecting instruction before installation.

3).Please apply the complete set of product according to the provided specification.

4).Please firstly open the cap in both ends, then insert the thread of wire, and lastly check the wire inserted firmly before covering the cap.

5).In order to avoid the damage of the equipment, please check the connecting method is correct before apply the power.

6).Please ensure that the grounding end to be well reliable grounding.

Remark: Triac dimming system and dimming switch/knob can’t be used simultaneously, but can be controlled respectively by Triac system or Triac dimming switch/knob.

TRIAC System Connection Notes:

1. Use of switching power supply power on before, please check whether the input and output lines connect to (alternating current (ac) line of fire, zero line, the grounding wire, dc voltage positive and negative), suggest using wire sectional area more than 0.75 mm copper wire; In order to ensure the safety of using and reduce interference, please ensure that grounding end is good reliable grounding.

2. When dimming,the output has the LED dimming instructions.

3. The Triac driver can cooperate with LUTRON, DYNALITE, OSRAM and TRIDONIC dimming system well.

Product Online:

TRIAC Dimming System Wiring Diagram: